RAPTOR is a tough and durable protective coating that provides a protective barrier to withstand the toughest situations. Spray or roll on RAPTOR to protect industrial surfaces, marine, off-road vehicles and much more. Raptor Liner is an excellent choice for protecting Trailers and Caravans. It is a strong 2K Polyurethane coating that is up to 5 times thicker than normal automotive paints. It is resistant to UV fade, corrosion, and is hard to chip or scratch. It is also water-resistant and helps protect surfaces from rust, making it perfect for surfaces frequently exposed to water, including saltwater. Raptor Liner can be applied over painted surfaces that have been cleaned and sanded. It is recommended to apply 2-3 light coats rather than one heavy coat.
Visit your local automotive paint distributor.
RAPTOR is compatible with any solvent based colour, including 2K Paints and can be added up to 100ml by volume (ask your paint supplier to leave out the binders, if possible, for best pigment density).
Note: RAPTOR cannot be used with water based, polyester or enamel paints.
Yes, RAPTOR can be applied to both steel and alloy wheels. Sand with P80 – P180 grit, use RAPTOR Acid Etch Primer or epoxy primer over exposed bare metal and apply.
When applying RAPTOR use automotive paint tape.
Wait 60 to 90 minutes after applying your final coat of RAPTOR to remove the tape.
Do not allow RAPTOR to come into contact with water for at least 72 hours.
The shelf life of an unopened RAPTOR kit is 2 years from the date of manufacture.
Yes, RAPTOR is available in a 2K & 1K aerosol available in Black and White.
A bottle kit of Raptor will cover 3 square meters, 2 coats. The 2K and 1K Aerosol will cover 1 square meter 2 coats.
There are no reviews yet.